Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Cleaning Across Everman
Air duct cleaning in Everman typically costs $380 – $690 for a full system on a standard single-story home, with the work completed in about three to five hours. We serve Everman’s 76140 ZIP and the surrounding neighborhoods around S. Race Street, Trammell Drive, and the older blocks near Enon Avenue. Our Everman customers get one flat price per system agreed before we touch a single register, not a per-vent quote that inflates once the technician walks your hallway. Call (737) 727-2314 and a live person answers, day or night.
Why Cardinal Air Duct Cleaning Is Everman’s Preferred Air Duct Cleaning Company
Everman homeowners tell us the same thing on almost every call: they want to know who is coming, what it will cost, and whether the work actually happened. We answer all three before the van arrives. Every booking includes The Relay Standard, a live trackable arrival time, before-and-after photos of your own ducts, and a digital invoice you pay from your phone. Omar Haddad, who leads our team, set the rule early on: no job starts without a written price, and no price changes at the door.
Our technicians are background-checked and arrive in uniform. They run Rotobrush brush systems and Nikro HEPA vacuums, not truck-mounted shop-vac shortcuts. In Everman’s older homes, where original sheet-metal trunks meet later flex-run additions, that equipment matters. A proper negative-pressure setup means loosened debris goes into the vacuum, not back into your living room. And our Air Duct Cleaning work carries the 365-Day Done Right Promise. If it is not right within a full year, we return and correct it at no charge.
Air Duct Repair in Everman
Air duct repair in Everman usually means sealing leaking joints, patching punctured flex runs, or replacing a crushed section of return duct that is starving your blower motor. In the 76140 ZIP, we see a lot of original ductwork from the 1960s and 70s that has never been properly sealed. Sheet-metal seams open over time. Flex runs get kinked in attics that hit 140 degrees in a Texas summer. A leaking return pulls attic air and dust straight into your system. Repair work in Everman typically runs $150 – $450 depending on access and the length of damaged run, and it is often done the same visit as your cleaning.
Sealing Leaking Duct Joints
Most Everman homes lose 20 – 30 percent of conditioned air through gaps in the ductwork before it ever reaches a vent. We seal those joints with mastic and aluminum tape rated for attic temperatures. This is not a caulk-and-hope shortcut. It is the same method used on new construction in Tarrant County.
Replacing Damaged Flex Runs
Flex duct installed in the 1980s or early 90s degrades. The inner liner tears, insulation settles, and the duct collapses under its own weight. When we find a crushed return or a disconnected supply run in an Everman attic, we replace the section and show you a photo of the old part next to the new one.
Ductwork Cleaning in Everman
Ductwork cleaning in Everman is the full process: mechanical agitation of every supply and return run, negative-pressure extraction, and air handler cleaning. In Everman’s older single-story homes, the trunks are often undersized for modern heat loads, so debris buildup hits airflow harder than it would in a newer build. A typical full ductwork cleaning in Everman runs $380 – $690, and we give you that price in writing before any work begins. No per-vent math. No surprise add-ons once the technician is inside.
Supply and Return Cleaning
Both sides matter. Supply ducts carry conditioned air into your rooms. Return ducts pull air back to the blower. If the return side is packed with lint, dust, and pet hair, the blower motor works harder and pulls more amps. We clean both, plus the registers and the air handler cabinet.
Full System Cleaning with Video Inspection
We can run a camera through your ducts before and after the job. You see exactly what was in there and what it looks like when we finish. Most Everman homeowners are surprised by the before images. The after images are the proof that the work was actually done.
Trusted Brands We Service in Everman
Everman’s housing stock spans several decades, and so does the equipment inside it. Our technicians work on systems paired with Honeywell filtration, Aprilaire media cabinets, and Abatement Technologies containment setups on larger commercial jobs. We keep common replacement parts on the truck, so when we find a failed filter housing or a cracked Aprilaire frame during a cleaning or repair, we can often handle it the same visit. No ordering parts and coming back in two weeks.
Common Air Duct Cleaning Problems We See in Everman Homes
- Original undersized sheet-metal trunks. Many Everman homes built before 1980 have trunks smaller than current Manual J calculations call for. Any dust or lint on the coils or in the trunk cuts airflow farther, which means higher summer bills and uneven cooling across rooms.
- Mixed original and added flex runs. A 1970s air handler often feeds later flex-run additions to converted garages or added bedrooms. Debris hides at the transitions, and negative pressure has to be set differently to pull material through the old metal and the new flex without damaging either.
- Lint and pet hair packed at returns near the air handler. The return path near the blower is where most debris concentrates in Everman homes. A register-only vacuum job skips this entirely and leaves the blower motor pulling through a clogged filter and dirty cabinet.
- High MERV filters straining older blowers. We see homeowners install MERV 13 filters in a system designed for MERV 8. The blower works harder, amp draw rises, and the motor burns out faster. We check filter fit and recommended MERV rating on every Everman job.
A field story worth sharing: our techs worked a 1970s ranch near S. Race Street where the homeowner complained about dust and high summer bills. A camera inspection showed lint packed at the supply and return ducts near the air handler and a blower motor pulling high amps. Using Rotobrush agitation tools under negative pressure and HEPA filtration, we performed source removal, cleaned the ductwork and registers, then restored MERV-based filtration and showed before-and-after photos of the homeowners’ own ducts before leaving.
Pricing for Air Duct Cleaning in Everman, TX
Most standard air duct cleanings in Everman run $380 – $690 for a typical single-story home. Two-story homes or systems with multiple air handlers can run higher, and we will tell you that before we start, not after. The price is one flat number per system. That covers supply ducts, return ducts, registers, and air handler cleaning. If we find damage during the cleaning, we quote the repair separately and you approve it before we proceed. Every job includes the written price, before-and-after photos, and the 365-Day Done Right Promise. Call (737) 727-2314 for a free estimate and we will give you an honest number for your Everman home.
Here is what a typical full-system cleaning in Everman looks like in dollars:
- Full duct cleaning, single-story home (up to 10 runs): $380 – $520
- Full duct cleaning, two-story or dual-zone system: $520 – $690
- Air handler and blower motor cleaning: included with full system cleaning
- Video inspection add-on: $75 – $125
- Duct repair or sealing (per job, if needed): $150 – $450
We Also Serve Cities Near Everman
While this page is for Everman homeowners, our crews also take jobs in the surrounding metro. If you are searching for Air Duct Cleaning in Everman or the neighborhoods just outside the city, we cover Fort Worth, Dallas, Houston, and San Antonio through the same Relay Home Co. network that backs every job with the 365-Day Done Right Promise.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Everman
Most Everman homes need air duct cleaning every three to five years, and the main drivers are real and local: pets, attic dust drawn into leaky returns, and Texas heat pushing your AC system hard for seven months a year. If you have a 1970s home with original ducts, if you have a dog or cat indoors, or if someone in the house has allergies or asthma, the three-year mark is the right interval. Rentals and homes after major remodeling often need it sooner since drywall dust and debris settle deep in the vents. If your ducts look clean and the blower is running at normal amps, we will tell you honestly that cleaning can wait. Call (737) 727-2314 and we will walk through your situation before recommending anything.
We charge one flat price per system, never per vent. Per-vent pricing is how the bait-and-switch works: a low per-vent number becomes a far larger invoice once the technician counts registers and adds “trunk cleaning” and “air handler service” as separate line items. In Everman’s older homes, where original metal trunks and later flex-run additions make a simple vent count misleading anyway, we quote a single price for the full system before work begins and that number does not change at the door. The written price covers supply ducts, return ducts, registers, and the air handler cabinet. If we find something that needs repair during the job, we price it separately and you approve it first.
We start with a visual inspection and a camera check of the trunk and returns. Then we run Rotobrush agitation tools through every supply and return run under negative pressure with Nikro HEPA filtration, so loosened debris goes into the vacuum and not back into your rooms. The air handler and blower motor get cleaned too, which is where a lot of the debris actually collects in 1970s and 80s Everman systems. Finally, we check filter fit and MERV rating for your specific blower, seal any accessible leaks we found, and take before-and-after photos of your own ducts. The whole job on a single-story Everman home usually runs three to five hours.
No, and honestly, you should be wary of any company that does. A proper duct cleaning on an Everman home takes three to five hours. It is scheduled work. A same-day promise usually means the crew plans to rush through the job, skip the air handler, or never intended to do a real source removal at all. We schedule you for a specific day and give you a live trackable arrival window through The Relay Standard, so you know exactly when we will be there. You will never be waiting around a four-hour window wondering if anyone is coming.
We run Rotobrush brush systems for agitation, Nikro HEPA vacuums for negative-pressure extraction, and Abatement Technologies containment units on larger commercial jobs in the Everman area. For filtration, we service and replace Honeywell and Aprilaire components. These are the same professional-grade tools used across the Relay Home Co. network, and our techs are trained on them specifically. If a system was installed with Aprilaire media cabinets or Honeywell filtration, we know how to integrate the cleaning with those components instead of working around them.
Written by Omar Haddad, Owner at Cardinal Air Duct Cleaning, serving Everman, TX.