Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable HVAC Cleaning Across Justin
HVAC cleaning in Justin typically costs $450 – $850 for a complete system, and most jobs are finished in four to six hours. We clean the entire air pathway: supply ducts, return ducts, evaporator coil, blower motor, and the air handler cabinet. If you’re off FM 156, near Reatta Farms, or tucked into a subdivision along US-114, call (737) 727-2314 and Omar or our scheduling team will walk you through exactly what your system needs and what it costs before anyone steps foot in your home.
Why Cardinal Air Duct Cleaning Is Justin’s Preferred HVAC Cleaning Company
We’re the HVAC Cleaning specialists in the Relay Home Co. family, and we work in Justin every week. A lot of what we do here is different from older housing stock in the metro area. Justin homes are largely new construction, which means the job is usually about construction debris, drywall dust, and builder-grade filter neglect, not decades of pet hair and candle soot. Knowing that changes how we quote, how long we spend, and what we recommend afterward.
Every booking comes with The Relay Standard: a live trackable arrival window, a written price before work starts, and before-and-after photos of your own ducts. No guessing what the crew did. No invoice that shifts after the panel comes off. The 365-Day Done Right Promise covers every job, including yours in the 76247 zip code. If anything isn’t right within a full year, we return and correct it at no charge.
Omar Haddad leads our team, and the technicians who arrive at your door are background-checked, uniformed, and running Rotobrush agitation tools paired with Nikro HEPA extraction units. You’ll know the tech’s name before they knock. That’s the standard for every job we book in Justin.
AC Vent Cleaning in Justin
AC vent cleaning in Justin means removing construction dust, drywall powder, and loose debris from the supply registers and return grilles, then cleaning the duct runs connected to them under negative-pressure extraction, which means loosened debris goes straight into the HEPA vacuum instead of back into your living room. New Justin homes need this more than older ones, because builders don’t seal ducts during drywall and trim work. The dust settles inside, and the first summer of hard AC use pushes it into every room.
Supply Register Cleaning
We remove each supply register in your home, clean the register itself, and run agitation tools into the duct boot to break loose anything clinging to the sides. In Justin’s two-story floor plans around Reatta Farms and Trails of Preston, we routinely see builders’ debris concentrated in upstairs registers where drywall dust settled during construction.
Return Air Path Cleaning
The return side pulls air from your living spaces back to the air handler, and in new Justin homes it pulls in a surprising amount of fine construction powder. We clean the return grilles, the return duct runs, and the filter housing. If your filter sits in a slot that was never cleaned after the build, we address that too.
Furnace Duct Cleaning in Justin
Furnace duct cleaning in Justin covers the complete heating-side air pathway: the supply plenum above the furnace, the return drop, and every connected duct run. Even though Justin winters are mild compared to the Midwest, your furnace still moves the same air as your AC, and any debris left from construction gets circulated all winter. We see it constantly in homes along FM 407 and near Northwest ISD schools.
Blower Motor and Cabinet Cleaning
The blower motor wheel is where dust accumulates fastest. In Justin new-builds, a film of drywall dust coats the blower wheel and reduces airflow within the first two years. We pull the blower, clean the wheel and housing, and inspect motor function. If the blower is left dirty, no duct cleaning will fix uneven heating or weak airflow.
Plenum and Duct Run Cleaning
We agitate and extract debris from the main supply plenum and every run connected to it. In larger Justin floor plans, that’s usually ten to eighteen runs. We price the entire system as one flat number, not per run, so the quote you approve is the quote you pay.
Trusted Brands We Service in Justin
We service and clean systems from every major manufacturer installed in Justin homes, including Carrier, Trane, Lennox, Rheem, Goodman, and Daikin. Our trucks carry replacement Aprilaire and Guardsman filtration media for the homes that use them. If you want an upgrade from a basic one-inch fiberglass filter to a media cabinet filter during your cleaning, we can quote the new filter and the cleaning together, one written price before we start.
Common HVAC Cleaning Problems We See in Justin Homes
- Drywall dust coating the blower motor and coil. Justin’s rapid build-out along US-114 and FM 156 means most systems built in the last five years have construction debris inside from day one. It reduces airflow, shortens filter life, and pushes dust into every room.
- Oversized systems in large floor plans. Many Justin homes in Reatta Farms and the surrounding subdivisions run bigger tonnage than the duct design really supports. Dirt accumulation on the coil and blower makes that mismatch worse and drives up energy bills.
- Builders’ debris inside return cavities. We regularly find drywall scraps, sawdust, and even paint chips inside return plenums on Justin new builds. Builders don’t clean duct systems before handoff.
- Homeowners told they need yearly cleaning on a two-year-old system. A new Justin home with clean ducts and a good filter doesn’t need annual cleaning. If your filter is clogging every month and your home is only a couple years old, the real problem is usually construction dust still moving through the system.
Pricing for HVAC Cleaning in Justin, TX
A complete HVAC cleaning in Justin runs $450 – $850 for a standard single-system home. That covers supply ducts, return ducts, the evaporator coil, blower motor, air handler cabinet, and all registers. Larger two-story homes with zoned systems or dual units can run higher, and Omar will give you an exact written number before any work begins. We never price per vent. Per-vent pricing invites quote creep on bigger Justin floor plans, and the final invoice rarely matches the number you heard on the phone. Our price is one flat number per system, agreed before a single panel is opened.
We Also Serve Cities Near Justin
Our crews serve Justin and the surrounding area, including Roanoke, Haslet, Argyle, and Keller. If you’re just outside Justin or your property sits along the Denton County line, call and we’ll confirm coverage. Dispatch is coordinated from our Dallas-Fort Worth office, and crews work Justin routes throughout the week.
Serving Justin, TX - Our Local Coverage Area
We’re based in the Justin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Cleaning in Justin
Every three to five years for most Justin homes, and longer if the system was cleaned after construction and you change filters regularly. A new-build in Justin that never had the construction dust removed will need its first cleaning within two or three years. If someone is telling you yearly, they’re selling a subscription, not a service. Call (737) 727-2314 for an honest assessment based on your system’s actual condition.
One flat price per system, always. You get a written quote before work starts, and that number does not change based on how many registers we pull. Per-vent pricing lets the count creep up on larger Justin floor plans, and we won’t do that to you. The written price you approve is the price you pay.
Because the builder never cleaned the ducts before handoff. Drywall dust, sawdust, and grit from construction sit inside the supply and return runs from day one, and every time your AC or furnace runs, some of it pushes into your living spaces. On a new-build in Reatta Farms off FM 156, our tech pulled the air handler panel and found a drywall-dust film coating the blower motor wheel from construction. We cleaned it under negative pressure with HEPA filtration, verified with a camera inspection, and the homeowner’s filter finally stayed clean past the two-week mark.
You get before-and-after photos of your own ducts, not a stock image. We run a camera inspection before we start and after we finish, and the photos are part of your digital invoice. That’s The Relay Standard, and it’s included on every Justin job. You see the interior of your own return plenum and supply runs, clean and verified.
No, they’re separate systems. Your dryer vent is its own exhaust line running from your dryer to the exterior wall or roof. We do offer dryer vent cleaning as a separate service, and it matters in Justin because new construction dryer runs are often long and tightly routed. But your HVAC duct cleaning covers the air pathway for heating and cooling only. Call (737) 727-2314 if you need both, and we’ll quote them separately.
If your Justin home has never had its HVAC system cleaned since construction, or if your registers are pushing dust onto furniture days after you dust, call Cardinal Air Duct Cleaning at (737) 727-2314. Omar and the team will answer, give you an honest read on whether cleaning is even needed, and quote one flat price per system before anything gets touched. No pressure. Just a straight answer.
Written by Omar Haddad, Owner at Cardinal Air Duct Cleaning, serving Justin, TX.