Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Cleaning Across Texas City
Air duct cleaning in Texas City, TX for a standard single-family home typically runs $450 – $850, with larger two-story homes or those with extensive return runs falling between $750 and $1,200. That’s a one-flat-price-per-system range, not a teaser number that changes once the van pulls up. We serve every neighborhood from Mainland Park to the historic downtown district, and we work around refinery shift schedules, not the other way around. Call (737) 727-2314 for a written quote before any work starts.
What makes us different in Texas City is simple: you see the job, you know the price, and you get proof it was done. No per-vent math. No upselling at the register. No mystery fogging that masks problems instead of removing them.
Why Cardinal Air Duct Cleaning Is Texas City’s Preferred Air Duct Cleaning Company
Texas City homeowners deal with a specific kind of air. The industrial corridor along the Houston Ship Channel puts fine particulate into the air that settles differently than the pollen-heavy air across the bay in Bacliff or the new-construction dust in League City. We plan our Air Duct Cleaning approach around that reality, not a generic checklist. Our crews know the housing stock here too: mid-century ranches off Palmer Highway, 1970s splits near College of the Mainland, and newer builds off Emmett F. Lowry Expressway each have distinct duct layouts and failure points.
Omar Haddad leads our Texas City operations, and he’s built the local team around one principle: answer the phone, show up on time, and do the work you quoted. Every technician is background-checked, uniformed, and equipped with Rotobrush agitation systems and Nikro HEPA-rated negative-pressure vacuums. That’s professional source removal, not a truck-mounted shop-vac.
We also carry the 365-Day Done Right Promise on every job in Texas City, no exceptions. If the work isn’t right within a full year, we return and correct it at no charge. That’s the longest-standing satisfaction window in the trade, and it applies to residential and commercial jobs alike.
Air Duct Repair in Texas City
Air Duct Repair in Texas City frequently means addressing duct runs that have separated at seams, collapsed under attic heat, or corroded from years of saline Gulf air and industrial fallout. When a supply or return run is compromised, your system pulls unconditioned attic air into the living space or pushes conditioned air into the walls. Repair work here typically runs $250 – $600 for sealing and reconnection, while replacing a damaged section of flexible duct runs $400 – $900 depending on access. We quote the repair before we start and back it with a written guarantee.
Sealing and Reconnection
Older Texas City homes often have galvanized trunk lines with duct tape that’s long since dried and peeled. We remove failed tape, re-seal seams with mastic and foil-backed tape rated for HVAC use, and verify the connection is airtight before we leave.
Damaged Run Replacement
Flex runs in attics near the coast take a beating from humidity and heat cycles. When we find a crushed or torn section, we replace it with properly sized insulated flex and strap it correctly. No shortcuts, no patch-and-pray.
Ductwork Cleaning in Texas City
Ductwork Cleaning in Texas City means pulling the actual contamination off the walls of your supply and return runs using agitation tools under negative pressure. That’s the trade term for running a HEPA-filtered vacuum that keeps the loosened debris moving in one direction: out of your ducts and into the containment unit, never back into your living room. A standard full-system cleaning for a 1,500 – 2,200 square foot home here runs $450 – $750, including the air handler and blower motor.
Supply and Return Cleaning
We brush every supply branch with Rotobrush whip lines and hand-clean the plenum, then do the same on the return side. The return matters more in Texas City than in most markets, because that’s where the fine industrial particulate gets pulled in and bonded to the duct walls before it ever reaches the filter.
Air Handler and Blower Maintenance
Skipping the air handler is the most common failure we see from other companies’ work in Texas City. If the blower wheel is caked, the system stays dirty no matter how clean the registers look. We clean the blower, evaporator coil housing, and cabinet as part of every full-system job, not as an add-on.
Trusted Brands We Service in Texas City
We work on systems from every major manufacturer, and we stock common parts and filtration products locally so Texas City customers aren’t waiting on shipping. That includes Aprilaire media filters, Guardsman electrostatic options, and Abatement Technologies containment units for jobs where heavy debris requires isolation. Whether your system is a 1990s Goodman, a newer Trane, or a Carrier heat pump, our techs know the layout and the common failure points. Fast turnaround means we diagnose on the first visit and, in most cases, complete the repair the same day without a second trip.
Common Air Duct Cleaning Problems We See in Texas City Homes
- Industrial particulate bonded to duct walls. The refinery and petrochemical corridor along the Ship Channel puts fine, slightly tacky particulate into the air. Over time, it bonds to galvanized duct walls and doesn’t respond to a simple brush-and-shop-vac approach. It requires agitation tools and HEPA extraction.
- Return-side restriction from caked debris. In homes near Mainland Park and along Highway 146, we regularly find return ducts restricted by years of accumulated grime. The return side pulls air continuously, and when it’s partially blocked, your blower works harder and your filters load faster.
- Filter bypass in older housing stock. Many mid-century Texas City homes have improper filter slots or gaps around the filter rack. Air bypasses the filter, which means whatever settles in the ducts stays in the ducts. We flag this during every cleaning and can often address it on the spot.
- Humidity-accelerated microbial growth. Gulf humidity plus the city’s warm shoulder seasons create conditions where ducts in unconditioned attics can support surface growth, especially when a run has been sweating. We identify the moisture source first before recommending any cleaning or treatment.
Pricing for Air Duct Cleaning in Texas City, TX
Here’s what you can expect to pay for duct cleaning in Texas City, based on the work we actually bid:
- Full system cleaning (1,500 – 2,200 sq ft): $450 – $750
- Larger homes or two systems: $750 – $1,200
- Air duct repair (sealing, reconnection): $250 – $600
- Damaged flex run replacement: $400 – $900
- Video inspection (standalone): $150 – $300, credited toward cleaning if you proceed
What affects the price: the number of systems, whether the air handler and blower are included (they always are in our full-system price), the length of the return run, and how heavily the ducts are loaded. We hand you a written price before a single tool comes off the truck, and that number doesn’t change at the door. Call (737) 727-2314 for a free, specific estimate.
We Also Serve Cities Near Texas City
Our crews handle Air Duct Cleaning in Texas City and the surrounding communities, including La Marque, Hitchcock, Dickinson, and Bacliff. If you’re just outside the city limits off Interstate 45 or down Highway 6, you’re still in our standard service area with no trip charge.
Serving Texas City, TX - Our Local Coverage Area
We’re based in the Texas City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Texas City
Every 3 to 5 years is realistic for most Texas City homes, though homes near the refineries or with shedding pets may benefit from a cleaning every 2 to 3 years. If you change filters on schedule and don’t smoke indoors, you probably don’t need annual service. The honest answer is that most homes don’t need yearly cleaning, and we’ll tell you if yours doesn’t. Call (737) 727-2314 and we’ll help you figure out where you stand.
One flat price per system, agreed in writing before we start. We don’t do per-vent pricing, and we don’t run teaser coupons that turn into larger invoices once the tech is inside. The quote we hand you covers the entire system: supply runs, return runs, plenum, air handler, and blower. That’s the only number you’ll ever see.
We run agitation tools through every supply and return branch while a Nikro HEPA vacuum maintains negative pressure on the system, so loosened debris goes straight into the containment unit. Then we hand-clean the plenum, blower, and air handler cabinet. Afterward, we show you before-and-after photos of your own ducts on the spot. You don’t take our word for it; you see the metal.
Yes, the blower and air handler are included in every full-system cleaning in Texas City, not billed as a separate line item. We clean the blower wheel, evaporator coil housing, and cabinet as part of the flat price. If we find a mechanical issue with the motor or a failing capacitor, we’ll show you the problem and give you a separate written quote before touching it.
Yes, for some homes. The fine particulate from the Ship Channel corridor is smaller and stickier than household dust, so it bonds to duct walls instead of blowing through. Homes within a mile or two of the refineries, or downwind along Highway 146, tend to load faster. That doesn’t mean everyone needs annual cleaning. It means the cleaning has to actually remove the particulate, not mask it with fogging. Call (737) 727-2314 for an honest assessment and a written quote.
Written by Omar Haddad, Owner at Cardinal Air Duct Cleaning, serving Texas City with straightforward pricing and documented results.