Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Collingdale
Dryer vent cleaning in Collingdale, PA typically costs $140 – $220 for a standard rowhome run, and the job usually takes 60 to 90 minutes once our tech arrives. Most Collingdale homes we service are post-war rowhomes and twins with vent runs that terminate at the rear alley wall, often with three or four elbows packed with lint a shop vac will never reach. We bring Rotobrush rotary brushes and Nikro HEPA extraction to the job, so lint leaves the run under negative pressure instead of getting pushed sideways into a shared-wall cavity. If you want a written price before anyone touches your dryer, call (737) 727-2314.
Why Cardinal Air Duct Cleaning Is Collingdale’s Preferred Dryer Vent Cleaning Company
Omar Haddad leads our team, and the standard he set is simple: a Collingdale homeowner should know the tech’s name before the door opens, see the price before a tool comes off the truck, and get before-and-after photos of the inside of their own vent run. That is the Relay Standard, and it applies to every booking in Collingdale without exception.
We clean a lot of vents along Clifton Avenue, MacDade Boulevard, and the blocks around Collingdale Park. Those homes share a profile: compact laundry areas, long rear-alley vent runs, and runs that take sharp turns through shared walls. Our techs know the difference between a first-floor laundry out the back and a second-floor stack that vents through the side wall, because they have worked both here. The 365-Day Done Right Promise backs every Collingdale job: if the work is not right within 365 days, we return and correct it at no charge.
We answer calls with a live person around the clock, and background-checked, uniformed techs arrive with the equipment named up front. No vague four-hour window. You get a live trackable arrival time, a written price, and photo proof of the work before you pay.
Dryer Vent Installation in Collingdale
Dryer Vent Installation in Collingdale comes up most when a rowhome run is so old, crushed, or improperly routed that cleaning alone cannot fix the airflow. A new run costs $180 – $300 for a typical rear-alley installation in Collingdale, depending on length, the number of elbows, and whether the old duct needs to be removed from a tight chase. We install rigid metal ducting where code and the run length allow, and we cut out sections of flex duct that are kinked, taped together, or sagging behind the dryer.
Vent Rerouting and Bird Guard Work
For homes where the dryer sits mid-row and the current vent exits near a window, door, or neighbor’s entry, we reroute the run to terminate cleanly at the rear wall with a proper exterior cap. We also fit bird guards over exterior terminations on Clifton Avenue and other blocks near mature trees, where sparrows and starlings routinely build nests that block airflow within a single season.
Vent Cap Replacement
Collingdale’s freeze-thaw cycles and direct afternoon sun on rear walls crack plastic vent caps faster than most homeowners expect. We replace damaged caps with louvered metal or guarded terminations as part of installation work. The cap is the last line of defense against rain, pests, and backdrafts, and it gets replaced on nearly every install we do in this borough.
Dryer Vent Repair in Collingdale
Dryer Vent Repair in Collingdale usually means a torn flex duct, a disconnected joint, or a crushed run behind the dryer that is strangling airflow. Repairs in Collingdale typically run $120 – $200 for a straightforward section replacement, and that includes reconnection at the appliance and exterior termination. We do not overlay a sheet metal patch over a torn flex duct and call it done: the damaged section comes out, and a rigid or semi-rigid replacement goes in its place.
Crushed and Disconnected Runs
Runs behind a front-loading dryer in a tight Collingdale laundry closet get crushed by the machine itself when it slides back against the wall. We pull the dryer, inspect the entire pathway with a camera, and replace the crushed section with ducting that holds its shape under compression. Airflow is confirmed with a meter at the exterior flap before we call the job complete.
Shared-Wall Chase Repairs
When a dryer vent shares a chase with a furnace flue or neighboring utility chase, the repair has to be done carefully and with the right tooling. We use Abatement Technologies containment where needed so debris stays out of the living space, and every repair carries a written guarantee plus a free second visit if the repair fails within the warranty window.
Trusted Brands We Service in Collingdale
Most Collingdale homes run basic builder-grade dryer venting, but plenty of residents have upgraded to brands like Aprilaire and Guardsman filtration on the HVAC side. On the dryer line, the brands matter less than the material and the routing: we stock rigid 4-inch metal duct, semi-rigid aluminum, louvered caps, and guarded terminations locally so Collingdale jobs do not wait on a parts shipment. That means a repair or install is typically completed in one visit, with no “we’ll be back next week” ending. Rotobrush brush heads and Nikro HEPA extraction units are part of our fleet, not rented or shared, and they are what actually clears the line when multiple elbows are involved.
Common Dryer Vent Cleaning Problems We See in Collingdale Homes
- Long rear-alley runs with multiple elbows. A 20-foot run with four 90-degree elbows is normal in Collingdale’s post-war rowhomes, and each elbow is a place lint stops moving. A short vacuum hose cannot reach past the first turn, which is exactly where the blockage forms.
- Crushed flex duct behind the dryer. Laundry closets in Collingdale are tight, and the machine gets pushed back until the flex duct folds. The exterior flap barely moves, the dryer takes two cycles per load, and the run packs solid at the kink.
- Shared-wall chases that trap lint near the furnace flue. A dryer vent that shares a wall cavity with the furnace flue gets hot and dry in a way free-hanging ducts do not. Lint in that space is a genuine fire hazard, not a maintenance footnote.
- Bird and rodent activity in rear-alley terminations. Rear alleys with mature trees and power lines attract nesting birds, and a nest inside a vent cap can fully block airflow in under a month during spring.
Pricing for Dryer Vent Cleaning in Collingdale, PA
A standard dryer vent cleaning in Collingdale runs $140 – $220 for a typical rowhome run, which includes brushing the full length of the run, HEPA extraction at the termination, and before-and-after camera photos of the airway. Longer runs over 25 feet, configurations with more than four elbows, or runs with an inaccessible termination point near a rear alley wall or shared chase may add $30 – $60. We quote one flat price per system and hand it to you in writing before work starts. There is no per-vent add-on, and the price does not change at the door. Call (737) 727-2314 for a free estimate.
We Also Serve Cities Near Collingdale
While this page focuses on dryers in Collingdale, our techs regularly run jobs in nearby Philadelphia, Levittown, Norristown, and Chester. You can learn more about our broader work on the Dryer Vent Cleaning page, and if you are catching up on borough-specific details, see Dryer Vent Cleaning in Collingdale for the local angle.
Serving Collingdale, PA - Our Local Coverage Area
We’re based in the Collingdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Collingdale
Every 12 to 18 months for a typical Collingdale rowhome laundry with a rear-alley run, and more often if you dry daily loads of towels or pet bedding. The lint you can reach at the trap is a fraction of what builds up in the run, especially at the elbows common in post-war rowhomes. If your laundry is on an upper floor with a longer run, lean toward the 12-month side. Call (737) 727-2314 and we can give you a straight answer based on your layout.
We charge one flat price per system, and that price is written down before any work starts. There is no per-vent pricing, no add-on for “extra elbows,” and no discovery fee once the tech is inside. That matters in Collingdale, where vent runs often share chases and take indirect paths that a per-vent quote would never account for honestly. The number on the quote is the number on the invoice.
We start with a camera inspection of the full run so we can see the elbows, the material, and where the blockage actually is. Then we run a Rotobrush rotary brush through the full length while a Nikro HEPA vacuum pulls the loosened lint out under negative pressure at the exterior termination. You get before-and-after photos of your own vent, not a stock image, and we confirm airflow at the flap with a meter. Most Collingdale rear-alley runs take 60 to 90 minutes.
Yes, and in Collingdale we do installs and repairs more often than basic cleanings on older homes. A crushed flex duct behind the dryer or a corroded rear-alley run is not something cleaning can fix. We cut out the damaged section, replace it with rigid or semi-rigid metal ducting, and guarantee the repair in writing. If the repair fails within the warranty window, the second visit is free. Call (737) 727-2314 and describe what you are seeing, and we will tell you bluntly whether it needs cleaned or replaced.
If you smell burning, see lint escaping around the dryer, or the exterior flap is not moving, call us right away at (737) 727-2314. We cannot guarantee same-day arrival, but a real person answers around the clock and we will get you scheduled as quickly as the calendar allows. In the meantime, stop using the dryer and disconnect nothing yourself; a packed vent run is a fire hazard, and the safest move is to leave the machine off until a tech has eyes on it.
Written by Omar Haddad, Owner at Cardinal Air Duct Cleaning, serving Collingdale.