Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across SeaTac
Dryer vent cleaning in SeaTac typically costs $145 to $295 for a standard single-family home, and $225 to $450 when the run is long, shared, or terminates on a roof. Most jobs take 90 minutes to two hours once we’re on site. If you live near Angle Lake, McMicken Heights, or along International Boulevard, you already know SeaTac’s housing leans toward low-rise apartments and condos where dryer vents run long and shared rather than short and straight. That changes how cleaning should be done here, and it’s exactly why we camera-inspect every run before we quote a single price. Call (737) 727-2314 for a written estimate before any work begins.
Why Cardinal Air Duct Cleaning Is SeaTac’s Preferred Dryer Vent Cleaning Company
SeaTac homeowners keep our number because we name a price before we touch the dryer. No per-vent upcharges, no discovery fees, no price that shifts once the technician is inside. We camera-inspect the full run first, show you what’s actually in there, then hand you a written flat price for the whole system. If the scope changes, the price doesn’t, unless you approve a change order in writing first.
We’re part of the Relay Home Co. family, founded 2005, and every booking carries The Relay Standard: a live trackable arrival window, before-and-after photos of your own ducts, and a digital invoice you can pay from your phone. Omar Haddad leads our team, and every technician is background-checked and arrives in uniform with a name you’ll know before the door opens. Our 365-Day Done Right Promise means if the work isn’t right within a full year, we return and correct it at no charge. A live person answers calls around the clock, and dispatch coordinates SeaTac jobs from the Seattle metro office.
We work in SeaTac weekly, so we know what the buildings here throw at us: rooftop terminations on 1970s apartment blocks off South 188th, sagging flex runs behind stacked laundry closets near the light-rail corridor, and long horizontal chases through building cores that hold far more lint than anyone expects.
Commercial Dryer Vent Cleaning in SeaTac
Commercial Dryer Vent Cleaning in SeaTac covers multi-unit residential buildings, property management portfolios, and any shared laundry facility where multiple dryers feed a common exhaust. The job starts with a camera inspection of every run, then mechanical agitation under negative pressure – that means loosened lint goes straight into a Nikro HEPA vacuum, not back into the living space. We document every step with before-and-after photos and provide a written report owners and managers can file. For most SeaTac commercial buildings, expect $350 to $900 per system depending on run length, access points, and how many dryers tie into the exhaust. Property managers around Sea-Tac Airport and the Angle Lake station area call us because we give one flat price per system and don’t bill per vent.
Shared Laundry Chases
Older SeaTac apartment buildings built in the 1960s and 1970s often route multiple dryer vents through a shared vertical chase. Lint accumulates not just at the dryer connection but along the entire shared run. A single clogged tenant line can back up every dryer on the stack. Our camera inspection maps the full path so we clean the actual blockage, not just the visible first few feet.
Rooftop Terminations
Many SeaTac low-rise condos terminate dryer vents on flat or low-slope roofs. Those runs are longer and pick up more moisture, which turns lint into a damp mat that sticks to duct walls. Roof access requires ladder work and careful sealing around the cap, so our flat price includes the full run from dryer to termination, whichever end we need to access.
Dryer Vent Cleaning Service in SeaTac
Dryer Vent Cleaning Service in SeaTac covers single-family homes, townhomes, and condos where one dryer exhausts through its own dedicated run. We start with a camera inspection, then run a Rotobrush rotary brush through the full length while a HEPA vacuum pulls debris out under negative pressure. After cleaning, we run the camera again and show you the before-and-after side by side. Standard SeaTac single-family jobs run $145 to $295, while longer runs with multiple bends or roof terminations run $225 to $450. You’ll get that written flat price before we start, and it won’t change at the door.
Angle Lake and McMicken Heights Homes
Homes in these neighborhoods range from 1950s ramblers to newer townhome clusters. Older homes often have short exterior-wall terminations, which are straightforward. Newer townhomes frequently route dryer vents through interior chases with two or three 90-degree bends, and those bends are where lint packs hardest. We log run length and bend count on every visit, so the next service call doesn’t start from zero.
Condos Near the Light-Rail Corridor
Stacked laundry closets in SeaTac condo buildings almost always mean a long flex run hidden behind the wall. The trap catches only a fraction of what actually builds up in the run. If drying time has crept up or the dryer feels hotter than it used to, the blockage is usually 10 to 15 feet down the line, not at the trap. Camera inspection finds it in minutes.
Trusted Brands We Service in SeaTac
We clean dryer vents behind every major dryer brand you’ll find in SeaTac homes: LG, Samsung, Whirlpool, Maytag, GE, Electrolux, Speed Queen, and Bosch. Our technicians run professional-grade equipment from Rotobrush and Nikro, with Abatement Technologies containment units when a SeaTac job calls for it. We carry common vent caps, bird guards, and termination components on the truck, so cap replacement or a bird guard install at your SeaTac property doesn’t mean a second visit. Most stock parts fit standard 4-inch dryer exhaust systems found throughout the area. Fast turnaround on specialty parts comes from our Seattle metro dispatch, and we’ll tell you the parts price before we install anything.
Common Dryer Vent Cleaning Problems We See in SeaTac Homes
- Long shared chases in low-rise condos. A single dryer may vent through 25 to 40 feet of duct shared with other units. The lint you see in the trap is a fraction of what’s packing the run, and short white flex hoses kink or sag behind walls where nobody can see.
- Rooftop terminations with three-plus bends. SeaTac’s flat and low-slope roofs mean many vents exit upward, not outward. Each 90-degree bend is a lint trap, and damp SeaTac air turns that lint into a thick mat that binds to the duct wall.
- Bird and rodent debris at the termination cap. SeaTac sits directly under a major migratory path. Starling and sparrow nests inside open vent caps are common, especially on buildings near greenbelts and retention ponds. Pests don’t just block airflow; they introduce flammable nesting material into the duct.
- Post-construction drywall dust. SeaTac’s light-rail expansion and constant condo turnover mean many units get renovated before resale. Contractors rarely seal dryer vents during drywall work, so fine dust coats the duct interior and turns into a paste once it meets humid dryer exhaust.
Pricing for Dryer Vent Cleaning in SeaTac, WA
A standard single-family dryer vent cleaning in SeaTac runs $145 to $295. Long runs, shared chases, rooftop terminations, or multiple bends run $225 to $450. Commercial buildings with multiple dryers feeding a common exhaust run $350 to $900 per system. What affects cost is honest scope: run length, number of bends, access difficulty, and whether the termination requires roof work. We camera-inspect first, then hand you one flat price for the entire system, agreed before work starts. No per-vent billing, no change at the door. Call (737) 727-2314 for a free estimate and we’ll confirm the written price over the phone after the inspection.
We Also Serve Cities Near SeaTac
Beyond SeaTac, our Dryer Vent Cleaning crews cover the surrounding metro area. We regularly work in Seattle, Tacoma, Vancouver, and Spokane, and our dispatch coordinates scheduling from the Seattle office. If you’re just outside SeaTac, call us and we’ll confirm coverage for your address. Same flat-price model, same 365-Day Done Right Promise, wherever the job is.
Serving SeaTac, WA - Our Local Coverage Area
We’re based in the SeaTac area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in SeaTac
If a full load takes more than one cycle to dry, the dryer exterior runs hot, or there’s a musty smell when it’s running, the vent is restricting airflow and needs attention. In SeaTac’s condos and apartments, the trap may look clean while the real blockage sits 10 or 15 feet down a long shared run. We camera-inspect every vent before quoting, so you’ll see the actual condition on screen and decide with the evidence in front of you. Call (737) 727-2314 and we’ll walk you through what to look for before scheduling.
No. We quote one flat price for the entire dryer exhaust system from dryer connection to outside termination. That’s the whole run, every bend, every access point, one price agreed before we start. SeaTac’s long and shared building chases are exactly why per-vent pricing doesn’t work here; it punishes you for the geometry of a building you didn’t design. We name one number after a camera inspection and that number stands.
Yes, and shared chases are the majority of what we clean in SeaTac’s low-rise condo stock. The camera inspection maps where your run connects to the shared path, and we clean from your dryer connection through the accessible length of the run. If access to the shared termination requires rooftop work, that’s included in the flat price. We’ll also document lint recovery with before-and-after photos so the building owner sees exactly what was removed from your portion of the chase.
For a single-family home with a short, straight run, every 18 to 24 months is honest. For SeaTac condos and apartments with long runs, shared chases, or rooftop terminations, every 12 months is our recommendation. Multi-unit buildings with shared laundry facilities should be cleaned every 6 to 12 months, or whenever drying time creeps up across units. We’ll tell you if your vent is clean and you don’t need us yet, which happens more than you’d think.
Both, and the safety issue is the more serious one. Lint is highly flammable, and a restricted vent raises dryer operating temperature while trapping that fuel inside the duct. The U.S. Fire Administration cites dryer vent fires as a leading cause of residential fires, and SeaTac’s long shared runs concentrate lint in exactly the places a fire would start. Beyond fire risk, a clogged vent forces the dryer to work harder, shortens its life, and can push carbon monoxide back into the living space on gas dryers. If your vent hasn’t been checked in over a year, call (737) 727-2314 for a camera inspection and a written quote.
Written by Omar Haddad, Owner at Cardinal Air Duct Cleaning, serving SeaTac with flat-price dryer vent cleaning, camera inspection, and before-and-after documentation on every job.